mobile phone：15900608468
Mailbox：ns@shnongsheng.com
website：www.shnongsheng.com
Address: 8888 Xiayan Road, Zhuqiao Town, Pudong New Area, Shanghai
PP21 is an entry-level product in Flier matrix block manufacturing machine. This machine can always provide matrix blocks with stable size, uniform pressing and good growth performance.
￭ The size of matrix block is stable and the pressing is uniform;
￭ The container is fully filled to prevent drying;
￭ Touch screen control panel, easy to operate.
■ technical parameter
project | describe |
model | PP21 |
brand | Flier Systems |
country of origin | Netherlands |
size | 8810*20180mm |
Basket size | 600 * 400 * 187mm |
Electrical requirements | Three-phase voltage 380V/50HZ+zero line+ground wire |
capacity | 500 baskets/hour |
■ form
blender
The mixer rotates alternately in two directions to ensure a perfect matrix mixture. The volume of the mixer is 1000 liters, and the output is more than 9000 liters/hour, which is applicable to various soil types.
Discharge height | 1.220 |
Matrix elevator
The matrix elevator is used to transport the mixed matrix, so the water has enough time to penetrate into the soil before the mixed matrix is transported to the matrix block maker.
Soil return opening | Yes |
Soil bunker level monitoring | Yes |
Matrix block maker PP21
PP21 is an entry-level product in Flier's matrix block manufacturing machine. This machine can always provide matrix blocks with stable size, uniform pressure hole and good growth performance. Unified matrix, unified crops, and unified quality.
Transport direction |
|
Box input side | Left |
Matrix recovery conveyor
The matrix recovery conveyor returns the excess matrix from the matrix block maker to the matrix elevator.
PP21 punch 42 mm 13 pieces/row
The matrix block mold is manufactured as a whole, which is more convenient and quick to replace. The frame contains shock absorber, which can control the noise.
Cutting pin diameter (mm) | 8 |
PP21 punch 42mm12 pieces/row
The matrix block mold is manufactured as a whole, which is more convenient and quick to replace. The frame contains shock absorber, which can control the noise.
Cutting pin diameter (mm) | 8 |
PP21 transfer box
The chrysanthemum block special transfer box picks up the matrix block from the matrix block conveyor belt and places it in the box provided. The transfer box can be replaced at will to produce matrix blocks of different sizes.
Type of blocking machine | PP21 |
External width | 350.5 |
Outside length | 540 |
Rows (block size) | 8 rows of 41,5 mm |
Nominal height of pot±5mm | 35 |
Desired pot height | 32 |
96 transfer boxes
The chrysanthemum block special transfer box picks up the matrix block from the matrix block conveyor belt and places it in the box provided. The transfer box can be replaced at will to produce matrix blocks of different sizes.
Type of blocking machine | PP21 |
External width | 350.5 |
Outside length | 540 |
Rows (block size) | 8 rows of 41,5 mm |
Nominal height of pot±5mm | 35 |
Desired pot height | 32 |
V-box transfer conveyor
Transport direction |
|
Inclined length (mm） | 4900 |
Belt height 1 (mm) | 750 |
Belt height 2 (mm) | 750 |
Frame width (mm) | 434 |
Guide configuration | 双边 Both sides |
Two running directions | 无 No |
Variable speed | 含 Yes |
Angle V-belt conveyor (°) | 0 |
Horizontal length (mm) | 4900 |
Destacker
The destacker is used to unload boxes. The whole stack of manually pushed boxes is unloaded from below and then placed on the V-belt under the destacker.
Infeed side | Right |
Case conveyor 1 meter
Transport direction |
|
Angle conveyor (°) | 0,0 |
Inclined length (mm) | 1.000 |
Belt height 1 (mm) | 750 |
Belt height 2 (mm) | 750 |
Frame width (mm) | 484 |
Guide configuration | both ends |
Two running directions | Excluding |
Variable speed | Excluding |
Anchor strut | Excluding |
Tiltable | Excluding |
Blocking column (4x)
Tray pusher
The tray feeder slides the tray from the conveyor belt to another conveyor belt or roller table.
Tray orientation | Length wise |
Case conveyor 2.5m
The conveyor belt is used to transport boxes.
Transport direction |
|
Angle conveyor (°) | 8.4 |
Inclined length (mm) | 2500 |
Belt height 1 (mm) | 750 |
Belt height 2 (mm) | 1095 |
Frame width (mm) | 484 |
Guide configuration | both ends |
Two running directions | Excluding |
Variable speed | Excluding |
Anchor strut | Excluding |
Tiltable | Excluding |
Cutting line
Transport direction |
|
Number of workstations | 8 |
Position of workstation | Both sides |
Drain gutter at workstation | Yes |
Table type | Stainless steel table with extra gas spring |
Width of work station (mm) | 1200 |
Height of work station (mm) | 800 |
Lighting above workstation | No |
Workstation supply counter | No |
Workstation that can be switched off | No |
Direction of supply conveyor | Equal to discharge belt |
Supply conveyor buffer | None |
Various tray types | No |
Total counter | No |
Pull cord | No |
Type of supply conveyor 1 | Roller conveyor with roller diam 50 and pitch 62 |
Type of supply conveyor 2 | 无 None |
Container width (mm) | 400 |
Tray length (mm) | 600 |
Tray height (mm) | 40 |
Capacity per station (p/h) | 10 |
Discharge number of tray/box (p/h) | 100 |
Maximum discharge weight (kg) | 0 |
Total length of discharge conveyor (mm) | 5000 |
Total Length (mm) | 5690 |
Case conveyor 2.5m
The conveyor belt is used to transport boxes.
Transport direction |
|
Angle conveyor (°) | -3..6 |
Inclined length (mm) | 2500 |
Belt height 1 (mm) | 750 |
Belt height 2 (mm) | 600 |
Frame width (mm) | 684 |
Guide configuration | both ends |
Two running directions | no |
Variable speed | no |
Anchor strut | no |
Tiltable | no |
Control cabinet
The whole production line is controlled by the central operation panel. The panel position is shown in the layout. Various electric control switches are installed in the cabinet. The size and structure can be adjusted as required. Optional: A display screen can be installed on the door panel of the operation panel, through which you can check and control the production line settings and modes. All cables required for machine operation are connected to the central operation panel through cable tray.
Online support/VPN solution | Industrial router, users can access up to 5 devices through broadband remote access |
Door panel display | no |
Stainless steel base | no |
Case conveyor 2.8m
The conveyor belt is used to transport boxes.
Transport direction |
|
Angle conveyor (°) | -13,4 |
Inclined length (mm) | 2800 |
Belt height 1 (mm) | 800 |
Belt height 2 (mm) | 180 |
Frame width (mm) | 684 |
Guide configuration | both ends |
Two running directions | no |
Variable speed | yes |
Anchor strut | no |
Tiltable | no |
Turning gear
The turner is used to turn the box 90 degrees.
Model | Right |
Stacker
Flier's case stacker has a solid structure, and can be accurately stacked one case at a specified or similar height. Stacks and boxes are automatically exported. Components required for continuous operation, such as roller conveyor, can also be connected with the stacker.
Manual control via switch button cabinet | Yes |
Operating side | Position 1 |
Function | Stacking |
Chain level (mm) | 180 |
Kind of box | Chrysanthemum |
High / low boxes | High boxes |
Roller conveyor (for rotating box)
In order to turn (a stack of) boxes 90 degrees, a section of pushing roller table is integrated into the production line.
Pallet stacking module
Flier's tray model 13-00 stacks 2x2 stacks on the tray. In order to ensure its normal operation, the pallet used must face the correct transportation direction during the unloading process.
Discharge direction |
|
