Transplanting and correction machine CombiFix II

Transplanting and correction machine  CombiFix II uses the imaging system developed by TTA to screen the optical appearance of each plant entering the machine, and blow out the empty, damaged and too small plants through the blow-out system at the bottom. By allocating one hole tray as the source hole tray for providing seedlings and other hole trays to be filled as the target hole tray for receiving seedlings, 100% of the seedling filling rate can be achieved and the seedlings are uniform as required. TTA's blow-out system also ensures that even fragile plants with incomplete rooting system can be treated with little damage to the roots. This CombiFix II is at the leading level in the market in terms of production quality and production speed.

￭ High quality, 100% seedling filling rate;

￭ Low damage, almost no damage to the root;

￭ High efficiency, with capacity of 12000 - 20000 plants/hour;

￭ The growth matrix does not need specific matrix plugs, and normal peat without large, long or hard objects can be used;

￭ Applicable to all common hole tray sizes (z large tray size 600x400 mm).

■ technical parameter

Note: 12000 - 20000 plants are the overall production capacity of CombiFix II, which varies according to the number of grippers, hole plates, substrates, plant differences, etc.

The operation plant shall also meet the following requirements:

Growth substrate: normal peat without large, long or hard objects.

Pot seedling: stable, without overgrown roots and twining leaves.

■ form

CombiFix II subject

CombiFix IIStandard edition contains：

•A set of general settings (including blowing out module, push rod and fixed head)

• TTA service router for remote services

Automatic feeding group of source cavity plate

The conveyor group at the front end of CombiFix II plays a buffering role and automatically feeds the source hole plate. The conveyor belt is set inside, 3600mm long and 600mm wide; Built-in stainless steel bracket, adjustable and painted. Cooperate with CombiFix to realize automatic control and speed adjustment

Unloading roller table（ × 2）

One roller table is used to remove the hole tray, and the other is used to manually review and remove the target hole tray that has completed the seedling filling work. 3600mm long and 600mm wide; Equipped with painted steel bracket, stainless steel plate and non-driven plastic roller; The roller table has small diameter and small pitch, which can ensure the smooth discharge of the hole plate. Both roller tables are equipped with system end switches.

Tool group

• Grease gun • Nozzle • Grease • Tool box: screwdriver x3, pointed-nose pliers, hexagonal wrench set, wrench x4.

Spare parts group

•MAX-556-22-50-V3 x2

• Jaw fingers x10

• Jaw feet x10

•PN-CJ2WB10-0050Z-DKV00832 x2

• Grab gloves x2 sets

Indicator system

• Red light - emergency stop circuit activated • Orange light - fault • Green light - machine in automatic mode • Green light flashing - machine still/automatic mode pending • Blue light - material used up/machine stopped • Blue light flashing - material about to be used up • Buzzer - material used up/fault.