CUTTING PLANTER 4000

CUTTING PLANTER 4000 automatically cuts cuttings onto a uniform carrier. Generally, the cuttings need to be placed on the carrier manually. Now, just lay the cuttings on the conveyor belt and provide the carrier, and the machine can complete the work by itself.

￭ One operator can operate seven machines;

￭ New varieties can also be used quickly;

￭ Continuous and high-quality cutting;

￭ Cutting depth is neat and consistent;

￭ Easy to operate;

￭ High reliability;

￭ Low maintenance costs.

■ technical parameter

Operating requirements:

￭ The machine is set as chrysanthemum cuttings, 600x400 trays with a fixed number of matrix blocks (planting mode to be determined).

￭ The pallet must be intact and firm; The matrix block needs to be fixed in the tray, on the side of the 400 mm side near the center of the tray. If the pallets are not the same, the customer should inform the minimum and z size. If the bottom height is different, it will affect the cutting depth of cuttings in the matrix block. In addition, the change of the height of the matrix block will also affect the cutting depth.

￭ The matrix block should be in the correct position in the tray, and the change of position will cause the cuttings to deviate from the center of the matrix block.

￭ 600mm side pitch can be adjusted in the user interface.

￭ 400mm side pitch is a fixed parameter.

￭ The center of the last row must be at least 35 mm from the handle inside the tray.

￭ Cutting parameters:

Chrysanthemum cuttings

Stem thickness: 2 mm to 5 mm

Leafless stem base

Z Small length: 40 mm

Z Large length: 70 mm

￭ The cuttings should be visible in the top-down view and placed flat on the conveyor belt.

￭ The cuttings shall be fresh and strong.

￭ The position of the supply tray is correct, and the supply volume should be consistent with the machine capacity.

■ form

Tray positioning belt

Vibration supply belt

Used to separate cuttings.

More mobile phone users

The number of grippers depends on the planting mode.

Planting bridge

Cutting detection imaging

Protective cover, PC and user interface frame

Potting automation line

After the well bred hole seedlings grow, they need more growth space and high-quality substrate to ensure the growth of seedlings. Automatic potting and substrate filling can be realized through the automatic potting system, and the seedling transplanting and automatic potting can be carried out synchronously by equipped with a pan transplanter or adding an extended conveyor belt operation station. The skip machine realizes the automatic placement and spacing adjustment from the flower pot to the growing seedling bed.

*The potting system can be configured with different capacity versions with the pot size of 5-21cm/15-30cm/8-26cm and the capacity of 2800/4000/7000 pots per hour.