Ground pipe rail sprayer HSE 300-T is a new solution for greenhouse spraying. It is equipped with two spray rods up to 3m high, one for spraying at the end, and the other for spraying plants on both sides. The equipped spray head can be adjusted and the spray liquid flow can be set separately.
▪ The unit is suitable for operation on a suitable greenhouse heating pipe and is equipped with a 300-liter water tank.
▪ PLC control, route and speed can be set, spray bar can be opened properly when driving, battery status monitoring can notify power consumption and calculate the remaining working time.
▪ The travel length and liquid volume of the spray truck can be preset, and it can automatically run on the heating pipe and spray plants.
▪ The special wheel system under the device and the steering system at the back can be replaced between rows without effort.
▪ There is a change-over switch near the control panel, which can control the speed of the equipment in manual mode when changing between lines.
■ technical parameter
project | describe |
model | HSE 300-T |
brand | FPHU MARYNIACZYK |
country of origin | poland |
Equipment size (L*W*H) | 2253*871*2098 mm |
Equipment weight | 570 kg |
Water tank volume | 300L |
Motor power | 0,5 kW |
Maximum pressure | 25 bar |
maximum output | 30 l / min |
running speed | 0-85 m / minute |
■ Configuration details
The spray head equipped with two spray rods can be configured with liquid spray flow separately. The medicine truck is equipped with a brushless electric engine and piston pump.
The hydraulic control unit, solenoid valve and computer electrical system are connected to inject medicine. The valve can be opened or closed immediately when each row of medicine is injected. The injection can be carried out in one or two directions - when returning to the middle channel, or when running to the end scheduling or returning. Both options are included in the liquid flow calculation, which controls the amount of liquid sprayed per hectare.
4,5 "touch panel, which allows users to control all aspects of HSE 300. It contains intuitive special software with clear graphics created by Maryniaczyk. It supports multiple languages. All parts of the equipment are controlled by graphic indicators (electricity, liquid consumption, speed, route, valve operation). The equipment operation is programmed according to special options.
The internal charger is a removable battery box or optional charging station. The battery box can be replaced quickly, which takes 60 seconds. There are main switches and front and rear safety bumpers at the bottom to prevent the equipment from hitting obstacles.
300L liquid storage tank and liquid flowmeter allow you to accurately control the liquid volume.
*The version of strawberry and raspberry can be customized (HSE 300-B), and the spray boom can be extended from above or below.
*The version (HSE 300-R) that can be customized to inject medicine into roses is designed as a special rose injection truck. The nozzle rod is lengthened at the bottom, and the nozzle direction is inclined upward, which can be used to spray the leaves at the bottom.