mobile phone：15900608468
Mailbox：ns@shnongsheng.com
website：www.shnongsheng.com
Address: 8888 Xiayan Road, Zhuqiao Town, Pudong New Area, Shanghai
Granette seeder is a fully programmed needle seeder installed on the conveyor belt. You can use a programmed computer to make settings and store these settings in the memory system. The unique suction nozzle design makes the precision of the Granette seeder z high in the market, and also endows the seeder with the characteristics of automatic cleaning. After each seeding cycle, the machine will automatically complete the cleaning of the nozzle tip. This avoids blocking and reduces the number of heavy seeds or missing seeds.
￭ This machine can change the size of the seedling tray in a few minutes.
￭ Modular design can be combined with other modular units to form a complete seeding production line.
■ technical parameter
project | describe |
Equipment name | Automatic seeding line (insert type) |
brand | Visser |
country of origin | Netherlands |
Total air consumption | 250 l/min |
Maximum seedling tray size | 600 x 400 mm |
Standard production capacity | 220 seedling tray/hour |
■ Configuration function composition
Matrix filling unit
The matrix filling machine, model VC-40, can adjust the rotor speed when filling the matrix. After filling, the brush will clean the excess matrix on the hole plate, and the speed can be synchronized with the speed of the seeder Speed Rouline; The matrix recovery system is equipped to recover the excess matrix into the hopper through the chain conveyor.
Serial number | Device description |
model | VC-40“Right-handed type” |
Maximum hole size | 400 x 600mm |
Maximum hole disc height | 210mm |
Hopper volume | 1000L |
capacity | 300-500 disks/h, specific according to other parameters |
Hole tray conveyor speed | 2-8m/min |
Electrical requirements | 380V three-phase voltage 50HZ+neutral line+grounding |
Total power | 1.36KW, also refer to other machine parameters |
Hole pressing unit
It can be customized according to the hole plate of different specifications, and ensure that each pressing hole is at the center of the hole plate hole, and the speed can be consistent with the speed of the conveyor belt.
Seeding unit
Unique suction nozzle design and various sizes of suction nozzle are applicable to almost all types of seeds in the world at present. Large, small, coated seeds, uncoated seeds, round seeds and even some seeds with strange shapes can also be sown.
Serial number | Device description |
model | Auto Seeder Granette |
Dimensions (length * width * height) | 2500*780*1230mm |
Maximum hole plate model | 600*400mm |
Seed type | Pellet seeds and different naked seeds, nozzle model 0.1-0.8mm |
capacity | 220 discs per hour, the specific seeding rate depends on the specific situation |
Overburden unit
Substrate mulching machine VT-450, which will cover the seeded hole with vermiculite to facilitate the growth of seeds. The vermiculite conveyor belt can have the same speed as the bottom conveyor belt to ensure uniform coverage each time.
Watering unit
Irrigation unit (extended version): bottom irrigation, extended version, which can fully wet seeds.
Serial number | Device description |
model | Subirrigation Water Tunnel（long version） |
size（L*W*H） | 4250 x 630 x 900mm |
Total capacity | 25L/h |
Maximum hole size | 400*600mm，Hole disc short side type |
capacity | Maximum 1000 trays/h, depending on the type of tray |
Top nozzle size | Adaptive customization |
Nozzle type | Adaptive customization |
Transfer unit
Belt conveyor, connected with configuration unit, with supporting leg.
