mobile phone：15900608468
Mailbox：ns@shnongsheng.com
website：www.shnongsheng.com
Address: 8888 Xiayan Road, Zhuqiao Town, Pudong New Area, Shanghai
The Visser automatic seeding line adopts the roller type, and the seeding line is mainly composed of the following core units: matrix filling unit, hole pressing unit, seeding unit, soil covering unit, watering unit, transmission unit, etc. In addition, we can also make further adjustments and customization according to your needs.
￭ When pelleted or round seeds are sown continuously, the production capacity is about 800 discs/hour;
￭ When the highly difficult seeds of marigold are sown continuously, the production capacity is about 300 discs/hour.
■ technical parameter
project | describe |
Equipment name | Automatic seeding line (drum type) |
brand | Visser |
country of origin | Netherlands |
Total air consumption | 250 l/min |
Maximum seedling tray size | 600 x 400 mm |
Standard production capacity | 800-1000 seedling tray/hour |
■ Function configuration
Matrix filling unit
The matrix filling machine, model VC-40, can adjust the rotor speed when filling the matrix. After filling, the brush will clean the excess matrix on the hole plate, and the speed can be synchronized with the speed of the seeder Speed Rouline; The matrix recovery system is equipped to recover the excess matrix into the hopper through the chain conveyor.
Serial number | 设备描述 |
model | VC-40“右手型” |
Maximum hole size | 400 x 600mm |
Maximum hole disc height | 210mm |
Hopper volume | 1000L |
capacity | 300-500 disks/h, specific according to other parameters |
Hole tray conveyor speed | 2-8m/min |
Electrical requirements | 380V three-phase voltage 50HZ+neutral line+grounding |
Total power | 1.36KW, also refer to other machine parameters |
Hole pressing unit
The electric drive hole pressing drum with cleaning brush can be customized according to the hole plate of different specifications, and ensure that each hole pressing is at the center of the hole plate hole, and the speed can be consistent with the speed of the conveyor belt. This hole pressing unit contains 288 hole plates, and another set of 200 hole pressing drum is required according to the hole plate specification.
Seeding unit
The model is Roulette XL, a fully automatic seeder, with a capacity of about 800 discs/h, a large width of 450 mm for the hole disc, and a length of 3000 mm for the conveyor belt. It is equipped with a 24-row seeding drum, a matching comb brush, and five air blowing devices; At the same time, seeding drums with different types of suction nozzles can be used for different hole seedling trays and seed scraping plates to remove redundant seeds; The seeding unit is equipped with 288 hole plates and suction nozzles; According to the situation of flower seeds, another 200 hole planting drum is required.
Serial number | Device description |
model | Roulette XL |
Dimensions (length * width * height) | 3000*1000*1650mm |
Total Power | 25KVA(400V) |
Maximum hole plate model | 600*400mm |
Maximum total seeds | 1014 |
Seed type | Pellet seeds and different naked seeds, nozzle model 0.1-0.8mm |
capacity | The maximum capacity is 800-1000 discs per hour, and the specific seeding rate depends on the specific situation |
Comb brush
It is used to keep the seeds adsorbed on the seeding drum in the same direction and comb out the redundant seeds; Each kind of seeding drum shall be equipped with corresponding comb brush.
Overburden unit
Substrate mulching machine VT-450, which will cover the seeded hole with vermiculite to facilitate the growth of seeds. The vermiculite conveyor belt can have the same speed as the bottom conveyor belt to ensure uniform coverage each time.
Watering unit
Irrigation unit (extended version): bottom irrigation, extended version, which can fully wet seeds.
Serial number | Device description |
model | Subirrigation Water Tunnel（long version） |
size（L*W*H） | 4250 x 630 x 900mm |
Total capacity | 25L/h |
Maximum hole size | 400*600mm，Hole disc short side type |
capacity | Maximum 1000 trays/h, depending on the type of tray |
Top nozzle size | Adaptive customization |
Nozzle type | Adaptive customization |
Transfer unit
Belt conveyor belt, model Vikon C70-70, length * width=3000 * 480mm, with supporting legs.
